GJSFJBV Duplex Armored Indoor Optical Fiber Cable
GJSFJBV Duplex Armored Indoor Optical Fiber Cable is an indoor fiber optic cable. The fiber optic cable is wrapped with a layer of flat stainless steel wire armor on the surface and reinforced with aramid yarn on the outer layer. It has excellent tensile and compressive properties and is suitable for use in indoor environments. The design of this fiber optic cable meets the demand for high-density and high-performance cabling in modern indoor environments, while providing additional protection to ensure the reliability and long lifespan of the fiber optic cable.
we manufactures a wide range of cables from 2-144fibers with a variety of designs to meet the demands of most installation conditions. Only the highest quality materials are used in our fiber optic cables to ensure that the cable strength and optical integrity are not compromised. Rugged jacket materials and the addition of armor provide the right level of protection.
Features of optical fiber cable
1. Use of tight sleeve optical fiber, easy to peel use
2. Compact fiber has good flame retardant performance
3. Aramid reinforced element enables the optical cable to have excellent tensile properties
4. Advantages of corrosion resistance, water resistance, UV protection, flame retardant and environmental protection
Application of optical fiber cable1. All kinds of connector
2. Fiber optic pigtails, patch cords.
3. Fiber optic equipment ,fiber optic patch panel,fiber to the desk,etc
4. Fiber optic equipment and instrument
5. Indoor cabling,building cabling,LAN, etc
6. Long distance, outdoor/indoor cabling, trunking,etc
7. Backbone network to the equipment in the building
8. Small installation space cabling
Specification
| Cable Parameter |
| Item | Specification |
| Fiber Count | 2 | 4 |
| Sub-unit Jacket | Material | LSZH |
| Thickness | 0.4mm±0.05mm |
| OD | 2.0mm±0.2mm |
| Armored Layer | Material | SUS204 |
| OD | 4.8mm±0.3mm | 6.0mm±0.3mm |
| Thickness | 0.4mm±0.05mm |
| Gap | 0.3mm±0.10mm |
| Strength Member | Aramid Yarn |
| Outer Jacket | Material | LSZH |
| Color | Black |
| Thickness | 0.9mm±0.1mm | 1.1mm±0.1mm |
| OD | 7.0mm±0.3mm | 7.5mm±0.1mm
8.0mm±0.1mm |
| Mechanical and Environmental Characteristics |
| Item | Specification |
| Fiber Count | 2 | 4 |
| Tension Resistance (N) | Long Term | ≥ 600 | ≥ 800 |
| Short Term | ≥ 1000 | ≥ 1200 |
| Crush Resistance (N/10cm) | ≥ 3000 |
| Nominal Weight (kg/km) | 65 | 85 |
| Operating Temperature ( ºC) | -40 ~ +80 |
| Storage Temperature ( ºC) | -40 ~ +80 |
| Fiber Parameters |
| Single Mode |
| Item | | Unit | G652D | G657A1 | G657A2 |
| Mode Field Diameter | 1310nm | μm | 9.1±0.4 | 8.8±0.4 | 8.8±0.4 |
| 1550nm | μm | 10.4±0.5 | 9.8±0.5 | 9.8±0.5 |
| Cladding Diameter | μm | 125±1 | 125±0.7 | 125±0.7 |
| Cladding Non-circularity | % | ≤ 1 | ≤ 0.7 | ≤ 0.7 |
| Core-cladding Concentricity Error | μm | ≤ 0.6 | ≤ 0.5 | ≤ 0.5 |
| Coating Diameter | μm | 245±7 | 245±5 | 245±5 |
| Coating Non-circularity | % | ≤ 6.0 | ≤ 6.0 | ≤ 6.0 |
| Cladding-coating Concentricity Error | μm | ≤ 12.0 | ≤ 12.0 | ≤ 12.0 |
| Cable Cutoff Wavelength | nm | ≤ 1260 | ≤ 1260 | ≤ 1260 |
| Attenuation Coefficient | 1310nm | dB/km | ≤ 0.4 | ≤ 0.4 | ≤ 0.4 |
| 1550nm | dB/km | ≤ 0.3 | ≤ 0.3 | ≤ 0.3 |
| Multimode |
| Item | Unit | 62.5/125 | 50/125 | OM3-150 | OM3-300 | OM4 |
| Core Diameter | μm | 62.5±2.5 | 50±2.5 | 50±2.5 | 50±2.5 | 50±2.5 |
| Cladding Diameter | μm | 125±1.0 | 125±1.0 | 125±1.0 | 125±1.0 | 125±1.0 |
| Core Non-circularity | % | ≤ 5.0 | ≤ 5.0 | ≤ 5.0 | ≤ 5.0 | ≤ 5.0 |
| Cladding Non-circularity | % | ≤ 1.0 | ≤ 1.0 | ≤ 1.0 | ≤ 1.0 | ≤ 1.0 |
| Core-cladding Concentricity Error | μm | ≤ 1.5 | ≤ 1.5 | ≤ 1.0 | ≤ 1.0 | ≤ 1.0 |
| Coating Diameter | μm | 245±7 | 245±7 | 245±7 | 245±7 | 245±7 |
| Coating Non-circularity | % | ≤ 6.0 | ≤ 6.0 | ≤ 6.0 | ≤ 6.0 | ≤ 6.0 |
| Cladding-coating Concentricity | μm | ≤ 12.0 | ≤ 12.0 | ≤ 12.0 | ≤ 12.0 | ≤ 12.0 |
| OFL Bandwidth | 850nm | MHz·km | ≥ 160 | ≥ 500 | ≥ 700 | ≥ 1500 | ≥ 3500 |
| 1310nm | MHz·km | ≥ 500 | ≥ 500 | ≥ 500 | ≥ 500 | ≥ 500 |
| Attenuation Coefficient | 850nm | dB/km | ≤ 3.0 | ≤ 3.0 | ≤ 3.0 | ≤ 3.0 | ≤ 3.0 |
| 1310nm | dB/km | ≤ 1.0 | ≤ 1.0 | ≤ 1.0 | ≤ 1.0 | ≤ 1.0 |
FAQ
Q1: What is the warranty of FiberMania's fiber patch cord?
A: FiberMania warrants that all fiber patch cords supplied are free from defects in material and workmanship for a period of
five (5) years from the date of supply. All fiber optic bulk cables are UL profiled and every single cable is 100% tested.
Q2: Is it possible to customize our brand information on your fiber cable?
A: Yes, we can print your brand name onto our cable jacket and 1KM total cable length is requested.
Q3: Can you do 3D interferometer test?
A: Yes, we do the 3D test per our customer's request, we can have the pass rate over 90% and even 100% if necessary.
Q4: What is your MOQ of your products?
A: We only have MOQ for some special customized cable order, we request 1km as the total length of the bulk cable, you may
consider stock the bulk cable with us for your urgent order production.
Q5: Are free samples available from you?
A: Yes, we are always happy to offer the free samples for all of our customers' projects provided that the total cost is under
50 US dollars.
Q6: Do you accept OEM and ODM orders?
A: Absolutely yes, we have been doing OEM services since we start in this business, and for every single label, printing, bag and
carton design, we always treat it seriously and do it nicely. Our engineers can help you with your current design and even can open
the new tooling for your specific project.
Product Tags:
|
|
GJSFJBV Duplex Armored Fiber Optic Cable 2 Core For LAN Backbones Images
|
